Coating Stand Alone

Coating solutions

Introducing the control unit for standalone coating.
This item is needed to control the standalone coating unit that consists of a weighing hopper, blend screw and a pump.
The material will be discharged through a weighing hopper. The loadcells on which the hopper will be placed for the weight information are also included in this item. The loadcells give the weight information of the hopper to the control system for accurate information about the dosing.
The flow from this hopper is operated by a slide and will control the output of the material through the loss in weight system.
From the hopper the material will enter the blending screw, this screw is designed to blend granular material with liquid or powdery material and is placed at 25 degrees angle. At the beginning of the screw an separate inlet is installed that will facilitate the input of liquid product.

Contact us

The Main Features

Inhibitor impregnation

Capacity 80 mᵌ to 200 mᵌ per hour.

Filling by a loader bucket

Close to the blending screw a pump will be installed that pumps the material from an IBC or tank. The IBC or is placed on a weighing scale and through the same loss in weight technique it is possible to measure the exact flow of material entering the screw. The pump itself is controlled with a Frequency transformer that can increase and decrease the speed of the pump based on the weight information coming from the system.
The complete system operates on a state-of-the-art software system that is user friendly and intuitive to use. The software system on a stand alone unit runs on the HMI in the electrical panel.

Contact us


Sign up and recieve our brochure